MAX4561_V1 データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
一致するリスト
MAX4561_V1 Datasheet PDF : 11 Pages
| |||
±15kV ESD-Protected, Low-Voltage,
SPDT/SPST, CMOS Analog Switches
ABSOLUTE MAXIMUM RATINGS
V+ to GND ................................................................-0.3 to +13V
IN, COM, NO, NC to GND (Note 1) ..............-0.3V to (V+ + 0.3V)
Continuous Current (any terminal)....................................±10mA
Peak Current
(NO, NC, COM; pulsed at 1ms 10% duty cycle).........±30mA
ESD Protection per Method IEC 1000-4-2 (NO, NC)
Air-Gap Discharge ........................................................±15kV
Contact Discharge ..........................................................±8kV
ESD Protection per Method 3015.7
V+, GND, IN, COM.......................................................±2.5kV
NO, NC..........................................................................±15kV
Continuous Power Dissipation (TA = +70°C)
5-Pin SOT23 (derate 3.1mW/C above +70°C .............247mW
6-Pin SOT23 (derate 8.7mW/°C above +70°C)...........696mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Note 1: Signals on NO, NC, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +4.5V to +5.5V, VIH = +2.4V, VIL = +0.8V, TA = TMIN to TMAX, unless otherwise specified. Typical values are at TA = +25°C.)
(Notes 2, 3)
PARAMETER
ANALOG SWITCH
Input Voltage Range
On-Resistance
On-Resistance Match
Between Channels
(Note 4)
On-Resistance Flatness
(Note 5)
Off-Leakage Current
(NO or NC)
COM Off-Leakage Current
(MAX4568/MAX4569 only)
SYMBOL
VCOM,
VNO, VNC
RON
∆RON
RFLAT(ON)
INO(OFF),
INC(OFF)
ICOM(OFF)
CONDITIONS
V+ = 4.5V, ICOM = 1mA;
VNO or VNC = 1V, 3.5V
V+ = 4.5V, ICOM =1mA;
VNO or VNC = 1V, 3.5V
V+ = 4.5V, ICOM = 1mA;
VNO or VNC = 1V, 2.25V, 3.5V
V+ = 5.5V, VCOM = 1V, 4.5V;
VNO or VNC = 4.5V, 1V
V+ = 5.5V, VCOM = 1V, 4.5V;
VNO or VNC = 4.5V, 1V
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
MIN TYP MAX UNITS
0
V+
V
45
70
Ω
75
0.5
2
Ω
3
2
4
Ω
5
-0.5 0.01
0.5
nA
-5
5
-0.5 0.01
0.5
nA
-5
5
V+ = 5.5V, VCOM = 1V, 4.5V;
TA = +25°C
-1
COM On-Leakage Current ICOM(ON) VNO or VNC = 1V, 4.5V or
unconnected
TA = TMIN to TMAX
-10
LOGIC INPUT
Input Logic High
VIH
2.4
Input Logic Low
VIL
Input Leakage Current
IIN
VIN = 0 or V+
-1
1
nA
10
V
0.8
V
1
µA
2
Share Link: 