General Description
SSD1332 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light
emitting diode dot-matrix graphic display system. SSD1332 consists of 288 segments (96RGB) and 64 commons. This IC is designed for Common Cathode type OLED panel.
SSD1332 displays data directly from its internal 96x64x16 bits Graphic Data RAM (GDDRAM).
Data/Commands are sent from general MCU through the hardware selectable 6800/8000 series
compatible Parallel Interface or Serial Peripheral Interface. SSD1332 has a 256 steps contrast control and 65K color control.
FEATURES
Support max. 96RGB x 64 matrix panel
Power supply: VDD=2.4V - 3.5V
VCC=8.0V - 18.0V
OLED driving output voltage, 16V maximum
DC-DC voltage converter
Segment maximum source current: 200uA
Common maximum sink current: 50mA
Embedded 96x64x16 bit SRAM display buffer
16 step master current control, and 256 step current control for the three color components
Programmable Frame Rate
Graphic Acceleration Command Set (GAC)
8-bit 6800-series Parallel Interface, 8-bit 8080-series Parallel Interface, Serial Peripheral
Interface.
Wide range of operating temperature: -30 to 85 °C