GENERAL DESCRIPTION
This document describes the differences between the ADSPBF523C/ADSP-BF525C/ADSP-BF527C and the ADSPBF522/ADSP-BF523/ADSP-BF524/ADSP-BF525/ADSPBF526/ADSP-BF527 standard product. Please refer to the published ADSP-BF522/ADSP-BF523/ADSP-BF524/ADSPBF525/ADSP-BF526/ADSP-BF527 Revision PrD datasheet for general description and specifications. This document only describes the exceptions to that datasheet.

PROCESSOR FEATURES
   Up to 600 MHz high-performance Blackfin processor
      RISC-like register and instruction model for ease of
         programming and compiler-friendly support
      Advanced debug, trace, and performance monitoring
   tbd V to tbd V core VDD with on-chip voltage regulation
   1.8 V, 2.5 V, or 3.3 V I/O operation
   Embedded low power audio CODEC
   289-ball MBGA package
   132K bytes of on-chip memory
   External memory controller with glueless support for SDRAM
      and asynchronous 8-bit and 16-bit memories
   Nand flash controller
   Flexible booting options from external flash, SPI and TWI
      memory or from SPI, TWI, and UART host devices
   One-time programmable memory for security
   Two dual-channel memory DMA controllers
   Memory management unit providing memory protection
   See the published ADSP-BF522/ADSP-BF523/
      ADSPBF524/ADSP-BF525/ADSP-BF526/ADSP-BF527 Revision
      PrD datasheet for additional peripherals

EMBEDDED CODEC FEATURES
   Stereo 24-bit A/D and D/A converters
   Highly efficient headphone amplifier
   Complete stereo/mono or microphone/line interface
   Normal and USB modes programmed under software control
   Selectable ADC High Pass Filter
   TWI or SPI Interface
   Programmable Audio Data Interface Modes
   I2S, Left, Right Justified or Frame Sync
   16-/20-/24-/32-bit Word Lengths
   Master or Slave Clocking Mode
   Microphone Input and Electret Bias with Side Tone Mixer
   Audio sample rates
      8 kHz, 44.1 kHz or 88.2 kHz
         at XTI/CODEC_MCLK frequency of either 11.2896 MHz
         (256 × fS) or 16.9344 MHz (384 × fS)
      8 kHz, 32 kHz, 48 kHz or 96 kHz
         at XTI/CODEC_MCLK frequency of either 12.288 MHz
         (256 × fS) or 18.432 MHz (384 × fS)
   DAC
      100 dB (A-weighted) signal-to-noise ratio at 3.3 V
      95 dB (A-weighted) signal-to-noise ratio at 1.8 V
   ADC
      90 dB (A-weighted) signal-to-noise ratio at 3.3 V
      85 dB (A-weighted) signal-to-noise ratio at 1.8 V
   Low power
      8 mW stereo playback (1.8 V all power supplies)
      20 mW record and playback (1.8 V all power supplies))
   Low supply voltages
      1.8 V to 3.6 V analog supply range
      1.8 V to 3.6 V digital supply range