GENERAL DESCRIPTION
The ADSP-2188M is a single-chip microcomputer optimized for digital signal processing (DSP) and other high-speed numeric processing applications.
The ADSP-2188M combines the ADSP-2100 family base architecture (three computational units, data address generators, and a program sequencer) with two serial ports, a 16-bit internal DMA port, a byte DMA port, a programmable timer, Flag I/O, extensive interrupt capabilities, and on-chip program and data memory.

FEATURES
   Performance
   13.3 ns Instruction Cycle Time @ 2.75 V (Internal),
      75 MIPS Sustained Performance
   Single-Cycle Instruction Execution
   Single-Cycle Context Switch
   3-Bus Architecture Allows Dual Operand Fetches in
      Every Instruction Cycle
   Multifunction Instructions
   Power-Down Mode Featuring Low CMOS Standby Power
      Dissipation with 200 CLKIN Cycle Recovery from
      Power-Down Condition
   Low Power Dissipation in Idle Mode

Integration
   ADSP-2100 Family Code Compatible (Easy to Use
      Algebraic Syntax), with Instruction Set Extensions
   256K Bytes of On-Chip RAM, Configured as
      48K Words Program Memory RAM
      56K Words Data Memory RAM
   Dual-Purpose Program Memory for Both Instruction and
      Data Storage
   Independent ALU, Multiplier/Accumulator, and Barrel
      Shifter Computational Units
   Two Independent Data Address Generators
   Powerful Program Sequencer Provides Zero Overhead
      Looping Conditional Instruction Execution
   Programmable 16-Bit Interval Timer with Prescaler
   100-Lead LQFP and 144-Ball Mini-BGA

System Interface
   Flexible I/O Structure Allows 2.75 V or 3.3 V Operation;
      All Inputs Tolerate up to 3.6 V Regardless of Mode
   16-Bit Internal DMA Port for High-Speed Access to
      On-Chip Memory (Mode Selectable)
   4 MByte Memory Interface for Storage of Data Tables
      and Program Overlays (Mode Selectable)
   8-Bit DMA to Byte Memory for Transparent Program
      and Data Memory Transfers (Mode Selectable)
   I/O Memory Interface with 2048 Locations Supports
      Parallel Peripherals (Mode Selectable)
   Programmable Memory Strobe and Separate I/O
      Memory Space Permits “Glueless” System Design
   Programmable Wait State Generation
   Two Double-Buffered Serial Ports with Companding
      Hardware and Automatic Data Buffering
   Automatic Booting of On-Chip Program Memory from
      Byte-Wide External Memory, e.g., EPROM, or
      through Internal DMA Port
   Six External Interrupts
   13 Programmable Flag Pins Provide Flexible System
      Signaling
   UART Emulation through Software SPORT Reconfiguration
   ICE-Port™ Emulator Interface Supports Debugging in
      Final Systems