ST1S06 データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

一致するリスト

ST1S06

Synchronous rectification with inhibit, 1.5 A, 1.5 MHz fixed or adjustable, step-down switching regulator

STMicroelectronics 

ST1S06xx

Synchronous rectification with inhibit, 1.5 A, 1.5 MHz fixed or

adjustable, step-down switching regulator

Features

■ Step-down current mode PWM (1.5 MHz) DC-

DC converter

■ 2% DC output voltage tolerance

■ Synchronous rectification

■ Inhibit function

■ Internal soft start

■ Typical efficiency: > 90 %

■ 1.5 A Output current capability

■ Not switching quiescent current: max 1.5 mA

over temperature range

■ RDS(ON) typ.150 mΩ

■ Uses tiny capacitors and inductors

■ Operative junction temp. - 30 °C to 125 °C

■ Available in DFN6D 3x3 exposed pad

Description

The ST1S06 is a step down DC-DC converter

optimized for powering low-voltage digital core in

HDD applications and, generally, to replace the

high current linear solution when the power

dissipation may cause an high heating of the

application environment. It provides up to 1.5 A

over an input voltage range of 2.7 V to 6 V. An high

switching frequency (1.5 MHz) allows the use of

tiny surface-mount components: as well as the

resistor divider to set the output voltage value,

only an inductor and two capacitors are required.

Besides, a low output ripple is guaranteed by the

DFN6D (3x3 mm)

current mode PWM topology and by the use of low

ESR SMD ceramic capacitors. The device is

thermal protected and current limited to prevent

damages due to accidental short circuit. The

ST1S06 is available in DFN6D 3x3 package.

Table 1. Device summary

Part numbers

ST1S06

ST1S06A

ST1S06XX12

ST1S06XX33

Order codes

ST1S06PUR

ST1S06APUR

ST1S06PU12R

ST1S06PU33R

Package

DFN6D (3x3 mm)

DFN6D (3x3 mm)

DFN6D (3x3 mm)

DFN6D (3x3 mm)

April 2008

Rev 7

1/20

www.st.com

Share Link: