AX88140A データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

一致するリスト

AX88140A

Fast Ethernet MAC Controller

Unspecified 

AX88140A

PRELIMINARY

4.2.6 Status Register (REG5)

1. The status register contains all the status bits that the AX88140A reports to the host.

2. Most of the fields in this register cause the host to be interrupted.

3. REG5 bits are not cleared when read.

4. Writing 1 to these bits clears them; writing 0 has no effect. Each field can be masked.

Field

31:26

25:23

22:20

19:17

16

15

13

11

10

9

8

7

6

5

R/W/C

-

R

-

-

R

R

R

R/W/C

R/W/C

R/W/C

R/W/C

R/W/C

R/W/C

R/W/C

Description

Reserved

EB - Error Bits

(Not generate interrupt)

Indicates the type of error that

caused system error.

Valid only when fatal bus error

REG5<13> is set.

25 24 23

0

0

0

0

0

1

0

1

0

0

1

1

Description

Parity error

Master abort

Target abort

Reserved

1

x

x

Reserved

Reserved.--Written as “0” for future compatibility concern.

Reserved.--Written as “0” for future compatibility concern.

NIS - Normal Interrupt Summary

Only the unmasked bits affect normal interrupt summary REG5<16> bit Normal interrupt

summary bit. Its value is the logical OR of :

CSR5<0>

transmit interrupt

CSR5<2>

transmit buffer unavailable

CSR5<6>

receive interrupt

CSR5<10>

Early transmit interrupt

CSR5<11>

General-purpose timer expired

AIS - Abnormal Interrupt Summary

Only unmasked bits affect only the abnormal interrupt summary REG5<15> bit.

Abnormal interrupt summary bits. Its value is the logical OR of :

CSR5<1>

transmit process stopped

CSR5<3>

transmit jabber time out

CSR5<5>

transmit under-flow

CSR5<7>

receive buffer unavailable

CSR5<8>

receive process stopped

CSR5<9>

receive watchdog time out

CSR5<13>

fatal bus error

FBE - Fatal Bus Error

Indicates that a system error occurred. If a system error occurs, all bus accesses are disabled

GTE - General Purpose Timer Expired

Indicates that the general-purpose timer (REG11) counter has expired. This timer is mainly used

by the software driver.

ETI - Early Transmit Interrupt

Indicates that the packet to be transmitted was fully transferred into the chip‘s internal transmit

FIFOs. Transmit interrupt (REG5<0>) automatically clears this bit.

RWT - Receive watchdog Time out

Indicates that the receive watchdog timer expired and another node is still active on the network.

In case of overflow, the long packets may not be received.

RPS - Receive Process Stopped

Asserts when the receive process enters stopped state.

RU - Receive Buffer Unavailable

Indicates the next descriptor in the receive list is owned by the host and cannot be acquired by

the AX88140A.The reception process is suspended.

RI - Receive Interrupt

Indicates the completion of a frame reception. Specific frame status information has been posted

in the descriptor. The reception process remains in the running state.

UNF - Transmit Under-flow

Indicates that the transmit FIFO had an under-flow condition during the packet transmission.

The transmit process is placed in the suspended state and under-flow error TDES0<1> is set.

4

-

Reserved.--Written as “0” for future compatibility concern.

23

ASIX ELECTRONICS CORPORATION

Share Link: