ADIS16229AMLZ データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

一致するリスト

ADIS16229AMLZ

Digital MEMS Vibration Sensor w/ Embedded RF Transceiver

Analog Devices 

ADIS16000/ADIS16229

Preliminary Technical Data

1 The maximum range depends on the frequency of vibration.

2 Assumes that frequency flatness calibration is enabled.

3 The digital I/O signals are 5 V tolerant.

4 Endurance is qualified as per JEDEC Standard 22, Method A117 and measured at −40°C, +25°C, +85°C, and +125°C.

5 Retention lifetime equivalent at junction temperature (TJ) = 85°C as per JEDEC Standard 22, Method A117. Retention lifetime depends on junction temperature.

6 The start-up times presented reflect the time it takes for data collection to begin.

7 Applies to the reset line (RST = 0) and the software reset command (GLOB_CMD[7] = 1). The RST pin must be held low for at least 10 μs.

Rev. PrA | Page 4 of 37

Share Link: