VSC7173XYI/G24 データシートの表示（PDF） - Maxim Integrated

部品番号

コンポーネント説明

一致するリスト

VSC7173XYI/G24

Enhanced 2:1 Port Selector and 1:2 Port Multiplier for Serial ATA and Serial Attached SCSI

Maxim Integrated 

Revision 4.1

May 23, 2005

Confidential

VSC7173 Data Sheet

Enhanced 2:1 Port Selector and 1:2 Port Multiplier for Serial ATA and Serial Attached SCSI

FEATURES

● 2:1 port selector and 1:2 port multiplier for both

Serial ATA (SATA) and Serial Attached SCSI

(SAS) links

● Serial ATA 1.0 compliant at 1.5 Gbps

(3.0 Gbps capable)

● Passes Serial ATA patterns transparently

● Programmable receiver sensitivity

● High output swing mode with pre-emphasis

● Compatible with VSC7175 and VSC7177 designs

● 0.7 W power dissipation

● 3.3 V power supply

● 32-pin, 7 mm x 7 mm QFP-N package

APPLICATIONS

● Active-passive redundant failover systems

● Dual-port Serial ATA and Serial Attached SCSI

disk arrays (JBODs)

● NAS servers

● RAID subsystems

● Disk-based backup systems

● Serial ATA and Serial Attached SCSI routing

applications

● Buffers for externally connected links

● Serial ATA port replicators

● Serial ATA Host Bus Adapters selecting between

internal and external connectors

To order the VSC7173 device, see “Ordering Information,” page 17.

GENERAL DESCRIPTION

The VSC7173 is a Serial ATA and Serial Attached SCSI multiplexer and buffer that implements a 2:1 port selector

function for 1.5 Gbps and 3.0 Gbps links. This function is used when dual hosts, such as I/O controllers, must access

single-port disk drives in high availability storage subsystems where redundancy and load sharing are important. The

outputs from the I/O controllers are multiplexed to a Serial ATA or Serial Attached SCSI drive. The output from the

Serial ATA drive is buffered and replicated to the I/O controllers. When switching from one I/O controller to the

other, a Serial ATA link must be re-initialized with out-of-band (OOB) signals, which are transferred through the

VSC7173 transparently. The VSC7173 provides high output swings with pre-emphasis, and programmable receiver

sensitivity that are needed to drive long backplanes and external cables.

In addition to the above features, the VSC7173 also supports a 1:2 port multiplier mode where one host can connect

two drives.

Port connectivity for the device is configured by driving external I/O pins. See the block diagram on page 2.

Maxim Integrated Products

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.

1 of 17

Share Link: