[ZENIC]
Interrupt controller for Z80
ZEN1020P is a programmable interrupt control IC for Z80 and is around the Z80 CPU. It is used as an element.
ZEN1020P supports mode 2 interrupts up to 8 factors. Interrupt mask, Kuta address specification is controlled by the program, and the occurrence of an interrupt cause can be detected at the edge or checked.
You can also select to detect with a bell. In addition, by forming a daisy chain, there are more factors.
It also supports squeeze control.
FEATURE
○ Programmable interrupt controller for Z80
○ Supports mode 2 interrupt factors up to 8 levels
○ Programmable specification of interrupt mask and vector address for each interrupt factor
○ Detect each interrupt factor at the edge (rising, falling) or level (H, L)
You can choose whether to do it with
○ Interrupt request input can be read
○ A daisy chain can be formed
○ Maximum clock frequency 8MHz
○ Low power consumption by adopting CMOS process
○ + 5v single power supply
○ DIP 28 pin