datasheetbank_Logo
データシート検索エンジンとフリーデータシート
HOME  >>>  Silicon Laboratories  >>> TS3310ITD1022 PDF

TS3310ITD1022 データシート - Silicon Laboratories

TS3310 image

部品番号
TS3310ITD1022

Other PDF
  no available.

PDF
DOWNLOAD     

page
20 Pages

File Size
8 MB

メーカー
Silabs
Silicon Laboratories Silabs

DESCRIPTION
The TS3310 is a low power boost switching regulator with an industry leading low quiescent current of 150nA. The 150nA is the actual current consumed from the battery while the output is in regulation. The TS3310’s extremely low power internal circuitry consumes 90nA on average, with periodic switching cycles which service the load occurring at intervals of up to 25 seconds, together yielding the average 150nA. The TS3310 steps up input voltages from 0.9V to 5V to eight selectable output voltages ranging from 1.8V to 5V. The TS3310 includes two output options, one being an always-on storage output while the additional output is an output load switch that is designed to supply burst-on loads in a low duty cycle manner. The TS3310 operates in Discontinuous Conduction Mode with an on-time proportional to 1/VIN, thereby limiting the maximum input current by the selection of the inductor value, ensuring the input current does not drag down the input source.
The extremely low quiescent current combined with the output load switch make the TS3310 an ideal choice for applications where the load can be periodically powered from the output, while being disconnected from the output storage capacitor when the load is powered off to isolate the load’s leakage current.
The TS3310 is fully specified over the -40°C to +85°C temperature range and is available in a low-profile, thermally-enhanced 10-pin 2x2mm TDFN package with an exposed back-side paddle.


FEATURES
♦ Ultra-Efficient Boost Converter:
   Active Mode, No-load Supply Current: 150nA
   Efficiency: Up to 92%
   Input Voltage Range: 0.9V-5V
   Delivers up to 35mA at 3VSTORE from 1.2VIN
   Single-inductor, Discontinuous Conduction Mode Operation
   No External Schottky Diode Required
♦ Pin-Selectable Output Voltages:
   1.8V, 2.1V, 2.5V, 2.85V, 3V, 3.3V, 4.1V, and 5V
♦ User-enabled Secondary Output Load Switch
♦ 10-Pin, Low-Profile, 2mm x 2mm TDFN Package


APPLICATIONS
  Coin Cell-Powered Portable Equipment
  Single Cell Li-ion or Alkaline Powered Equipment
  Solar or Mechanical Energy Harvesting
  Wireless Microphones
  Wireless Remote Sensors
  RFID Tags
  Blood Glucose Meters
  Personal Health-Monitoring Devices
  ZigBee Radio Enabled Devices
  Low-Energy Bluetooth Radio Enabled Devices

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

部品番号
コンポーネント説明
PDF
メーカー
A True 150-nA IQ, 0.9-3.6VIN, Selectable 1.8-5VOUT Instant-OnTM Boost Converter
Unspecified
A True 150-nA IQ, 0.9-3.6VIN, Selectable 1.8-5VOUT Instant-On™ Boost Converter
Touchstone Semiconductor Inc
Low IQ Synchronous Boost Controller
Linear Technology
1.8 A DC-DC converter modules
STMicroelectronics
Low IQ Boost/SEPIC/ Inverting Converter with 1A, 60V Switch
Linear Technology
14-Bit, 150 MSPS, 1.8 V Analog-to-Digital Converter
Analog Devices
INSTANT VOICE ROM
Mosel Vitelic, Corp
High-Efficiency LCD Boost with True Shutdown ( Rev : 2009 )
Maxim Integrated
High-Efficiency LCD Boost with True Shutdown
Maxim Integrated
Micropower Boost Converter
Micrel

Share Link: GO URL

EnglishEnglish Korean한국어 Japanese日本語 Russianрусский Spanishespañol

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]