SMART 5 BOOT BLOCK FLASH MEMORY FAMILY 2, 4, 8 MBIT

Intel’s Smart 5 boot block flash memory family provides 2-, 4-, and 8-Mbit memories featuring high-density, low-cost, nonvolatile, read/write storage solutions for a wide range of applications. Their asymmetrically blocked architecture, flexible voltage, and extended cycling provide highly flexible components suitable for embedded code execution applications, such as networking infrastructure and office automation.

SmartVoltage Technology
Smart 5 Flash: 5 V Reads, 5 V or 12 V Writes
Increased Programming Throughput at 12 V VPP
Very High-Performance Read
2-, 4-Mbit: 60 ns Access Time
8-Mbit: 70 ns Access Time
x8 or x8/x16-Configurable Data Bus
Low Power Consumption
Max 60 mA Read Current at 5 V
Auto Power Savings: <1 mA Typical Standby Current
Optimized Array Blocking Architecture
16-KB Protected Boot Block
Two 8-KB Parameter Blocks
96-KB and 128-KB Main Blocks
Top or Bottom Boot Locations
Extended Temperature Operation
 –40 °C to +85 °C
industry-Standard Packaging
40, 48-Lead TSOP, 44-Lead PSOP
Extended Block Erase Cycling
100,000 Cycles at Commercial Temp
10,000 Cycles at Extended Temp
Hardware Data Protection Feature
Absolute Hardware-Protection for Boot Block
Write Lockout during Power Transitions
Automated Word/Byte Program and Block Erase
Command User Interface
Status Registers
Erase Suspend Capability
SRAM-Compatible Write Interface
Reset/Deep Power-Down Input
Provides Low-Power Mode and Reset for Boot Operations
Pinout Compatible 2, 4, and 8 Mbit
ETOX™ Flash Technology
0.6 µETOX IV Initial Production
0.4 µETOX V Later Production