DESCRIPTION
The ST8009 is a 96-output segment/common driver IC suitable for driving small/medium scale dot matrix LCD panels, and is used in PDA or electronic dictionary. The ST8009 is good as a segment driver, a common driver or a common/segment driver, and it can create low power consumption, high-resolution LCD. The ST8009 have eight modes can selected to set common and segment numbers by selecting register. The ST8009 also have analog DC/DC converter to use.
FEATURES
• Number of LCD drive outputs: 96
• Supply voltage for LCD drive (VOUT): Max +16V
• Supply voltage for logic system (VDD): +2.5 ~ +5.5V
• Low power consumption and low output impedance
• Display duty selectable by internal select register
• Abundant command functions
LCD bias set, electronic volume, VSS voltage regulation internal resistor ratio and booster frequency.
All Functions have initial value, user can set by programmed.
• Low-power liquid crystal display power supply circuit equipped internally.
Booster circuit (with Boost ratio of 2X/3X/4X/5X/6X)
Regulator circuit
Follower circuit
• Package: 124-pin COB.
(Segment mode)
• Shift clock frequency
- 20 MHz (MAX.): VDD = +5.0 ± 0.5 V
- 15 MHz (MAX.): VDD = +3.0 to + 4.5 V
- 12 MHz (MAX.): VDD = +2.5 to + 3.0 V
• Adopts a data bus system
• 4-bit parallel / serial input modes are selectable by programmable.
• Automatic transfer function of an enable signal
• Automatic counting function which, in the chip
selection mode, causes the internal clock to be
stopped by automatically counting 16、 32、 48、 64、
80、 96 bits of input data
• Line latch circuits are reset when XDISPOFF active
(Common mode)
• Shift clock frequency: 4 MHz (MAX.)
• Built-in X-bit shift register
• Available in a single mode
• CS0 CSX Single mode
CSX CS0 Single mode
PS:X=15、 31、 47、 63、 79、 95
The above 4 shift directions are register selectable
• Shift register circuits are reset when XDISPOFF active