Description
The SK10/100EL16V is a differential receiver with variable output swing. Its VCTRL input controls the amplitude of the Q and Q* outputs. The operating range of the EL16V control input, VCTRL, is from VBB (large swing) to VCC (min swing), see Figure 2. Simple control of the output swing can be obtained by a variable resistor between the VBB and VCC pins, with wiper driving CTRL. Typical application circuits and results are described in Figures 1a, 1b, and 2.

FEATUREs
• Extended Supply Voltage Range: (VEE = –5.5V to –3.0V, VCC = 0V) or (VCC = +3.0V to +5.5V, VEE = 0V)
• High Bandwidth Output Transitions
• 240 ps typical Propagation Delay
• VBB Output
• Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D*
• Q Output will Default Low with Inputs Open or at VEE
• New Differential Input Common Mode Range
• ESD Protection of >4000V
• Specified Over Industrial Temperature Range: –40°C to 85°C
• Available in both 8 Pin SOIC (150 mil) and MSOP (3mm x 3mm) Packages
• Flammability Rate: UL-94 code V-0.
• Moisture Sensitivity: Level 1.