General Description
The RT9706 is a cost-effective, low voltage, single N-Channel MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The RT9706 equipped with a charge pump circuitry to drive the internal MOSFET switch; the switchs low RDS(ON) 80mΩ, meets USB voltage drop requirements; and a flag output is available to indicate fault conditions to the local USB controller.
FEATUREs
● Compliant to USB Specifications
● Built-In (Typically 80mΩ) N-Channel MOSFET
● Output Can Be Forced Higher than Input (Off-State)
● Low Supply Current :
►25μA Typical at Switch On State
►0.1μA Typical at Switch Off State
● Guaranteed 500mA Continuous Load Current
● Wide Input Voltage Ranges : 2V to 5.5V
● Open-Drain Fault Flag Output
● Hot Plug-In Application (Soft-Start)
● 1.7V Typical Under-Voltage Lockout (UVLO)
● Current Limiting Protection
● Thermal Shutdown Protection
● Reverse Current Flow Blocking (no body diode)
● Smallest SOT-23-5 Package Minimizes Board Space
● UL Approved−E219878
● RoHS Compliant and 100% Lead (Pb)-Free
APPLICATIONs
● USB Bus/Self Powered Hubs
● USB Peripherals
● ACPI Power Distribution
● PC Card Hot Swap
● Notebook, Motherboard PCs
● Battery-Powered Equipment
● Hot-Plug Power Supplies
● Battery-Charger Circuits