PRODUCT SUMMARY
The pASIC 3 FPGA family features up to 60,000 usable PLD gates. pASIC 3 FPGAs are fabricated on a 0.35mm four-layer metal process using QuickLogic’s patented ViaLink technology to provide a unique combination of high performance, high density, low cost, and extreme ease-of-use.

DEVICE HIGHLIGHTS
High Performance and High Density
■ 60,000 Usable PLD Gates with 316 I/Os
■ 16-bit counter speeds over 300 MHZ, data path speeds over 400 MHz
■ 0.35um four-layer metal non-volatile CMOS process for smallest die sizes

Easy to Use/Fast Development Cycles
■ 100% routable with 100% utilization and complete pin-out stability
■ Variable-grain logic cells provide high performance and 100% utilization
■ Comprehensive design tools include high quality Verilog/VHDL synthesis

Advanced I/O Capabilities
■ Interfaces with both 3.3 volt and 5.0 volt devices
■ PCI compliant with 3.3V and 5.0V buses for -1/-2 speed grades
■ Full JTAG boundary scan
■ Registered I/O cells with individually controlled clocks and output enables

Total of 180 I/O pins
■ 308 bidirectional input/output pins, PCI-compliant for 5.0 volt and 3.3 volt buses for -1/-2 speed grades
■ 8 high-drive input/distributed network pins

Eight Low-Skew Distributed Networks
■ Two array clock/control networks available to the logic cell flip-flop clock, set and reset inputs - each driven by an input-only pin
■ Up to six global clock/control networks available to the logic cell F1, clock, set and reset inputs and the input and I/O register clock, reset and enable inputs as well as the output enable control - each driven by an input-only or I/O pin, or any logic cell output or I/O cell feedback

High Performance
■ Input + logic cell + output total delays under 6 ns
■ Data path speeds exceeding 400 MHz
■ Counter speeds over 300 MHz