[MEMSIC, Inc.]

GENERAL DESCRIPTION
The MXC6202G/H/M/N are low cost, dual axis accelerometers fabricated on a standard, submicron CMOS process. It is a complete sensing system with on-chip mixed signal processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources. The MXC6202G/H/M/N measures acceleration with a full-scale range of ±2 g and a sensitivity of 512counts/g (G/M) or 128counts/g (H/N) @3.0 V at 25°C. It can measure both dynamic acceleration (e.g. vibration) and static acceleration (e.g. gravity). The MXC6202G/H/M/N design is based on heat convection and requires no solid proof mass.

FEATURES
   RoHS compliant
   I2C Slave, FAST (≤400 KHz.) mode interface
   1.8V compatible IO
   Embedded Power up/down and self-test function
   On-chip temperature sensor available
   Eight customer defined 7-bit addresses
   2.7 V to 3.6 V single supply continuous operation
   Monolithic CMOS IC
   Low power consumption: typically <2 mA @ 3.0 V
   Resolution better than 1 milli-g
   On chip mixed signal processing
   >50,000 g shock survival rating
   Low profile LCC package: 5mm X 5mm X 1.55mm

APPLICATIONS
   Information Appliances – Cell Phones, PDA’s, Computer Peripherals, Mouse, Smart Pens
   Consumer – LCD Projectors, Pedometers, Blood Pressure Monitor, Digital Cameras
   Gaming – Joystick/RF Interface/Menu Selection/Tilt Sensing
   GPS – Electronic Compass Tilt Correction, Dead Reckoning Assist