General Description
The MLX90609 Angular Rate Sensor is a full gyroscopic system. A single SMD package contains a high performance silicon micro machined sensor with signal conditioning circuitry. It operates from 5V supply and is designed for demanding automotive applications.
The MLX90609 delivers two output signals proportional to the angular rate perpendicular to the assembly surface. One of the output signals is in an analog voltage format (the output is 2.5V at zero angular rate and the full scale angular rate produces an output of 4.5V or 0.5V depending on direction of rotation) and the other one is in digital SPI format.

Standard Features and Benefits
❐ High resolution and dynamic range
❐ Both digital (SPI) and analog outputs
❐ Low acceleration and angular rate cross
   sensitivity
❐ Low zero rate output drift
❐ Cost effective and compact solution
❐ High-performance MEMS sensor in mono
   crystalline Si yielding a superior long term
   behavior reliability and dynamic range
❐ Programmable bandwidth
❐ Factory set full scale range
❐ On chip EEPROM calibration
❐ Small footprint (SMD CLCC32) with horizontal
   mounting
❐ Operating temperature range: -40°C to 85°C

APPLICATION
❐ Navigation (dead reckoning)
❐ Vehicle stability
❐ Robots