High Slew Rate, Wide Bandwidth, JFET Input Operational Amplifiers

These devices are a new generation of high speed JFET input monolithic operational amplifiers. Innovative design concepts along with JFET technology provide wide gain bandwidth product and high slew rate. Well–matched JFET input devices and advanced trim techniques ensure low input offset errors and bias currents. The all NPN output stage features large output voltage swing, no deadband crossover distortion, high capacitive drive capability, excellent phase and gain margins, low open loop output impedance, and symmetrical source/sink AC frequency response.
This series of devices is available in fully compensated or decompensated (AVCL≤2) and is specified over a commercial temperature range. They are pin compatible with existing Industry standard operational amplifiers, and allow the designer to easily upgrade the performance of existing designs.

• Wide Gain Bandwidth: 8.0 MHz for Fully Compensated Devices
                                       16 MHz for Decompensated Devices
• High Slew Rate: 25 V/µs for Fully Compensated Devices
                             50 V/µs for Decompensated Devices
• High Input Impedance: 1012Ω
• Input Offset Voltage: 0.5 mV Maximum (Single Amplifier)
• Large Output Voltage Swing: –14.7 V to +14 V for
                                                 VCC/VEE = ±15 V
• Low Open Loop Output Impedance: 30 Ω @ 1.0 MHz
• Low THD Distortion: 0.01%
• Excellent Phase/Gain Margins: 55°/7.6 dB for Fully Compensated
   Devices