The MC33502 operational amplifier provides rail−to−rail operation on both the input and output. The output can swing within 50 mV of each rail. This rail−to−rail operation enables the user to make full use of the entire supply voltage range available. It is designed to work at very low supply voltages (1.0 V and ground), yet can operate with a supply of up to 7.0 V and ground. Output current boosting techniques provide high output current capability while keeping the drain current of the amplifier to a minimum.

Features
•Low Voltage, Single Supply Operation(1.0 V and Ground to 7.0 V and Ground)
•High Input Impedance: Typically 40 fA Input Current
•Typical Unity Gain Bandwidth @ 5.0 V = 5.0 MHz, @ 1.0 V = 4.0 MHz
•High Output Current (ISC = 40 mA @ 5.0 V, 13 mA @ 1.0 V)
•Output Voltage Swings within 50 mV of Both Rails @ 1.0 V
•Input Voltage Range Includes Both Supply Rails
•High Voltage Gain: 100 dB Typical @ 1.0 V
•No Phase Reversal on the Output for Over−Driven Input Signals
•Input Offset Trimmed to 0.5 mV Typical
•Low Supply Current (ID= 1.2 mA/per Amplifier, Typical)
•600 Drive Capability
•Extended Operating Temperature Range (−40 to 105°C)
•Pb−Free Packages are Available