Description
The EP16T is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 with internal termination resistors. A 50  resistor is connected from the D input to the VT pin and from the D input to the VT pin. Tie the VT and VT pins to VTT supply (VCC − 2 V) for parallel termination or connect VT and VT pins for 100  input series termination. Special considerations are required for differential inputs under No Signal conditions to prevent instability.
The 100 Series contains temperature compensation.

FEATUREs
• 220 ps Typical Propagation Delay
• Maximum Frequency > 3 GHz Typical
• PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
• NECL Mode Operating Range: VCC = 0 V with VEE = −3.0 V to −5.5 V
• Internal 50  Termination Resistors
• Pb−Free Packages are Available