Description
The MC10E/100E143 is a 9-bit holding register, designed with byte-parity applications in mind. The E143 holds current data or loads new data, with the nine inputs D0 − D8 accepting parallel input data.
The SEL (Select) input pin is used to switch between the two modes of operation − HOLD and LOAD. Input data is accepted by the registers a set-up time before the positive going edge of CLK1 or CLK2. A HIGH on the Master Reset pin (MR) asynchronously resets all the registers to zero.
The 100 Series contains temperature compensation.
   
Features
• 700 MHz Min. Operating Frequency
• 9-Bit for Byte-Parity Applications
• Asynchronous Master Reset
• Dual Clocks
• PECL Mode Operating Range:
    ♦ VCC= 4.2 V to 5.7 V with VEE= 0 V
• NECL Mode Operating Range:
    ♦ VCC= 0 V with VEE = −4.2 V to −5.7 V
• Internal Input 50 k Pulldown Resistors
• ESD Protection:
    ♦ Human Body Model; > 2 kV
    ♦ Machine Model; > 200 V
• Meets or Exceeds JEDEC Standard EIA/JESD78 IC Latchup Test
• Moisture Sensitivity Level: 3 (Pb-Free)
    ♦ For Additional Information, see Application Note AND8003/D
• Flammability Rating: UL 94 V−0 @ 0.125 in,
    Oxygen Index: 28 to 34
• Transistor Count = 484 devices
• These Devices are Pb-Free, Halogen Free and are RoHS Compliant