General Description
The MAXQ2000 microcontroller is a low-power, 16-bit device that incorporates a liquid-crystal display (LCD) interface that can drive up to 100 (-RBX/-RBX+) or 132 (-RAX/-RAX+/-RFX/-RFX+) segments. The MAXQ2000 is uniquely suited for the blood-glucose monitoring market, but can be used in any application that requires high performance and low-power operation

FEATUREs
♦ High-Performance, Low-Power, 16-Bit RISC Core
    DC to 20MHz Operation, Approaching 1MIPS per MHz
    Dual 1.8V Core/3V I/O Enables Low Power/Flexible Interfacing
    33 Instructions, Most Single Cycle
    Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement
    16-Level Hardware Stack
    16-Bit Instruction Word, 16-Bit Data Bus
    16 x 16-Bit, General-Purpose Working Registers
    Optimized for C-Compiler (High-Speed/Density Code)
♦ Program and Data Memory
    32kWords Flash Memory, Mask ROM for High Volume Applications
    10,000 Flash Write/Erase Cycles
    1kWord of Internal Data RAM
    JTAG/Serial Boot Loader for Programming
♦ Peripheral Features
    Up to 50 General-Purpose I/O Pins
    100/132 Segment LCD Driver
        Up to 4 COM and 36 Segments
        Static, 1/2, and 1/3 LCD Bias Supported
        No External Resistors Required
    SPITM and 1-Wire® (-RAX/-RAX+/-RFX/-RFX+ Only) Hardware I/O Ports
    One or Two Serial UARTs
    One-Cycle, 16 x 16 Hardware Multiply/Accumulate with 48-Bit Accumulator
    Three 16-Bit Programmable Timers/Counters
    8-Bit, Subsecond, System Timer/Alarm
    32-Bit, Binary Real-Time Clock with Time-of-Day Alarm
    Programmable Watchdog Timer
♦ Flexible Programming Interface
    Bootloader Simplifies Programming
    In-System Programming Through JTAG
    Supports In-Application Programming of Flash Memory
♦ Ultra-Low-Power Consumption
    190µA typ at 8MHz Flash Operation, PMM1 at 2.2V
    700nA typ in Lowest Power Stop Mode
    Low-Power 32kHz Mode and Divide-by-256 Mode

APPLICATIONs
    Medical Instrumentation
    Battery-Powered and Portable Devices
    Electrochemical and Optical Sensors
    Industrial Control
    Data-Acquisition Systems and Data Loggers
    Home Appliances
    Consumer Electronics
    Thermostats/Humidity Sensors
    Security Sensors
    Gas and Chemical Sensors
    HVAC
    Smart Transmitters