General Description
The MAX17014 multiple-output power-supply controller generates all the supply rails for thin-film transistor (TFT) liquid-crystal display (LCD) panels in TVs and monitors operating from a regulated 12V input. It includes a step-down and a step-up regulator, a positive and a negative charge pump, two operational amplifiers, and a Dual Mode™ logic-controlled high voltage switch control block. The MAX17014 can operate from 8V to 16.5V input voltages and is optimized for LCD TV panel and LCD monitor applications running directly from 12V supplies.
FEATUREs
♦ Optimized for 10.8V to 13.2V Input Supply
♦ 8V to 16.5V Input Supply Range
♦ Selectable Frequency (600kHz/1.2MHz)
♦ Current-Mode Step-Up Regulator
Built-In 20V, 3.3A, 110mΩ n-Channel MOSFET
High-Accuracy Output Voltage (1%)
True Shutdown
Fast Load-Transient Response
High Efficiency
3ms Internal Soft-Start
♦ Current-Mode Step-Down Regulator
Built-In 20V, 2.5A, 120mΩ n-Channel MOSFET
Fast Load-Transient Response
Adjustable Output Voltage Down to 1.25V
Skip Mode at Light Load
High Efficiency
3ms Internal Soft-Start
♦ Adjustable Positive and Negative Charge-Pump Regulators
♦ Soft-Start and Timer-Delay Fault Latch for All Outputs
♦ Logic-Controlled High-Voltage Integrated Switches with Adjustable Delay
♦ Two High-Speed Operational Amplifiers
±150mA Short-Circuit Current
100V/µs Slew Rate
20MHz, -3dB Bandwidth
♦ 120mΩ p-Channel FET for AVDD Sequencing
♦ Input Undervoltage Lockout and Thermal Overload Protection
♦ 48-Pin, 7mm x 7mm Thin QFN Package
APPLICATIONs
LCD TV Panels
LCD Monitor Panels