[Future Designs, Inc. (FDI)]
The NXP LCD Demo is a reference design for a low cost microcontroller and LCD solution. The two main NXP parts used in this design can be purchased for less than $1.50 in 1,000 unit quantities and only a few other external components are required. The Demo Board is controlled by a simple two-button user interface (MODE and SELECT). The Demo Board CD includes example code for several sample applications: an FM Radio display during a simulated channel scan, a 15 minute count down timer, a repeating pattern of 4 text lines and a scrolling message window. The user can edit this code and download to the reprogrammable Flash microcontroller via a 10-pin header included on the board using any external ICP style programmer. A small USB based ICP programmer that allows ICP programming of the P89LPC9103 and many other NXP microcontrollers from any PC with a USB port is also available from Future Designs, Inc. Details can be found at www.teamfdi.com/USB-ICP
Highlights
• Low-cost 2-chip solution for LCD User Interface
• Flexible layout supports 3 microcontroller options
➤ 10 pin HVSON to 28 pin PLCC package
➤ 1KB to 8KB internal Flash memory
• 8-character alphanumeric LCD
• I2C based LCD driver with 128 segment support
• Powered by a single 3V coin cell battery
• Two miniature push-buttons for user control
• Reprogrammable by the user via 10-pin ICP header
FEATUREs
P89LPC9103 8-bit, 2-clock, 80C51 MCU
• 1 KB Flash, 128 bytes RAM
• 10-pin HVSON package (3 x 3mm2)
• Internal RC Oscillator
• UART, ADC, DAC
• Two 16-bit timers & RTC
• Keypad Interrupt
• WDT with on chip 400kHz oscillator
PCF8562TT Single-chip LCD controller/driver
• 48-Pin TSSOP package
• 32 x 4-bit RAM for display data storage
• 400 kHz I2C-bus interface
• No external components
• Wide supply range