Overview
The LC898111AXA and the LC898111AXB are image stabilization system control LSIs for smartphone camera modules.
The LSIs have built-in digital signal processing circuits, such as a 2ch saturation H-Bridge Driver and a Flexible Filter circuit, and control VCM type actuators.
The LC898111AXA and the LC898111AXB are identical LSIs except for the dimensions, i.e. XA has WLP thickness, max. 0.33 mm without back coat (B/C) and XB has WLP thickness, max. 0.69 mm with B/C.
Function
■ Digital signal processing LSI (Logic LSI)
• Built-in digital servo circuit
• Built-in Gyro filter
• AD converter
• 12-bit
• input 5ch
• Equipped with a sample-hold circuit
• DA converter
• 8-bit
• Output 2ch (Constant current Bias : max 7mA)
• Built-in Serial I/F circuit (2-wire I2C-Bus or 4-wire SPI Bus interface)
• Built-in Hall Bias circuit
• Built-in Hall Amp (Gain of Opamp : x25, x50, x75, x100, x150, x200)
• Built-in OSC (Oscillator)
48MHz ± 5% (Frequency adjustment function)
• External Clock input is possible from TSTCLK (48MHz ± 5%)
• Built-in LDO (Low Drop-Out regulator)
• Digital Gyro I/F for the companies (SPI Bus)
(Please refer for the details)
• Support Hall sensor and Photo Reflector as means to detect a position
■ Motor Driver
• Saturation-drive H bridge x2ch
• IO max : 220mA
■ Package
• LC898111AXA : WLP48J
(2.57mm x 3.22mm, thickness max 0.33mm, without B/C)
• LC898111AXB : WLP48
(2.57mm x 3.22mm, thickness max 0.69mm, with B/C)
• Pb-free
• Halogen Free
■ Power supply voltage
• Logic : DVDD30 = 2.6 to 3.6 V
• Driver : VM = 2.6 to 3.6 V