Description
The IDT7024 is a high-speed 4Kx 16 Dual-Port Static RAM. The IDT7024 is designed to be used as a stand-alone 64K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 32-bit or more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 32-bit or wider memory system applications results in full-speed, errorfree operation without the need for additional discrete logic.

FEATUREs
◆ True Dual-Ported memory cells which allow simultaneous
   reads of the same memory location
◆ High-speed access
   – Military: 20/25/35/55/70ns (max.)
   – Industrial: 55ns (max.)
   – Commercial: 15/17/20/25/35/55ns (max.)
◆ Low-power operation
   – IDT7024S
      Active: 750mW (typ.)
      Standby: 5mW (typ.)
   – IDT7024L
      Active: 750mW (typ.)
      Standby: 1mW (typ.)
◆ Separate upper-byte and lower-byte control for multiplexed
   bus compatibility
◆ IDT7024 easily expands data bus width to 32 bits or more
   using the Master/Slave select when cascading more than
   one device
◆ M/S = H for BUSY output flag on Master
   M/S = L for BUSY input on Slave
◆ Interrupt Flag
◆ On-chip port arbitration logic
◆ Full on-chip hardware support of semaphore signaling
   between ports
◆ Fully asynchronous operation from either port
◆ Battery backup operation—2V data retention
◆ TTL-compatible, single 5V (±10%) power supply
◆ Available in 84-pin PGA, Flatpack, PLCC, and 100-pin Thin
   Quad Flatpack
◆ Industrial temperature range (–40°C to +85°C) is available
   for selected speeds
◆ Green parts availble, see ordering information