Description
The IDT7006 is a high-speed 16K x 8 Dual-Port Static RAM. The IDT7006 is designed to be used as a stand-alone 128K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 16-bit or wider memory system applications results in full-speed, error-free operation without the need for additional discrete logic.

FEATUREs
◆ True Dual-Ported memory cells which allow simultaneous reads of the same memory location
◆ High-speed access
   – Military: 20/25/35/55/70ns (max.)
   – Industrial: 55ns (max.)
   – Commercial: 15/17/20/25/35/55ns (max.)
◆ Low-power operation
   – IDT7006S
      Active: 750mW (typ.)
      Standby: 5mW (typ.)
   – IDT7006L
      Active: 700mW (typ.)
      Standby: 1mW (typ.)
◆ IDT7006 easily expands data bus width to 16 bits or more using the Master/Slave select when cascading more than one device
◆ M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave
◆ Busy and Interrupt Flags
◆ On-chip port arbitration logic
◆ Full on-chip hardware support of semaphore signaling between ports
◆ Fully asynchronous operation from either port
◆ Devices are capable of withstanding greater than 2001V electrostatic discharge
◆ Battery backup operation—2V data retention
◆ TTL-compatible, single 5V (±10%) power supply
◆ Available in 68-pin PGA, quad flatpack, PLCC, and a 64-pin TQFP
◆ Industrial temperature range (–40°C to +85°C) is available for selected speeds
◆ Green parts available, see ordering information