General Description
The ICL761X–ICL764X family of monolithic CMOS op amps combine ultra-low input current with low-power operation over a wide supply voltage range. With pin selectable quiescent currents of 10µA, 100µA, or 1000µA per amplifier, these op amps will operate from ±1V to ±8V power supplies, or from single supplies from 2V to 16V. The CMOS outputs swing to within milli volts of the supply voltages. The ultra-low bias current of 1pA makes this family of op amps ideal for long time constant integrators, picoammeters, low droop rate sample/hold amplifiers and other applications where input bias and offset cur rents are critical. A low noise current of 0.01pA√Hz and an input impedance of 1012Ω ensure optimum performance with very high source impedances in such applications as pH meters and photodiode amplifiers.

FEATUREs
♦ Pin-for-Pin Second Source
♦ 1pA Typical Bias Current—4nA (max) at +125°C
♦ ±1V to ±8V Wide Supply Voltage Range
♦ Industry-Standard Pinouts
♦ Programmable Quiescent Currents of 10µA, 100µA, and 1000µA
♦ Monolithic, Low-Power CMOS Design