[ENPIRION]

Description
This Enpirion EN5360 is a Power Systemon a Chip DC-DC converter. It is specifically designed to meet the precise voltage and fast transient requirements of present and future high-performance, low-power processor, DSP, FPGA, memory boards and system level applications in a distributed power architecture.
Advanced circuit techniques, ultra high switching frequency, and very advanced, high-density,
integrated circuit and proprietary inductor technology deliver high-quality, ultra compact, non-isolated DC-DC conversion. Operating this converter requires only four external components that include small value input and output ceramic capacitors and a soft-start capacitor.
The Enpirion EN5360 significantly helps in system design and productivity by offering greatly simplified board design, layout and manufacturing requirements. In addition, a reduction in the number of vendors required for the complete power solution helps to enable an overall systemcost savings. 

FEATUREs
•  Up to 20Woutput power (at VOUT=3.3V)
•  External inductor is NOT required
•  Lead-Free packaging
•  5MHz operating frequency
•  More than 90% efficient
•  VOUTaccuracy of 2% over line, load and temperature
•  1/3 the board area of discrete component solutions
•  Very fast transient response
•  All high speed switching signals contained inside the part
•  Wide input voltage range of 2.375V to 5.5V
•  Digital voltage selector with options for common output voltages from0.8V to 3.3V
•  External resistor divider and OVP option for output voltages from0.8V to VIN-600mV
•  Output enable pin and Power OK signal
•  Programmable soft-start time
•  Over-current protection
•  Thermal shutdown, short circuit, output over voltage and input under-voltage protection

Applications
•  Servers, workstations and PCs
•  Broadband, networking, LAN/WAN, optical telecommunications equipment
•  Point of load regulation for low-power processors, network processors, DSPs, FPGAs, and ASICs
•  Low voltage, distributed power architectures with 2.5V, 3.3V or 5V rails