General Description
The AP3156 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AP3156 is capable of driving the LED channels at 120mA maximum from a 2.7V to 5.5V input. The current sinks may be operated individually or in parallel for driving higher-current LEDs. A low external parts count (two 1µF flying capacitors and two small 1µF capacitors at VIN and VOUT) make this part ideally suited for small, battery-powered applications.
FEATUREs
• VIN Range: 2.7V to 5.5V
• Fully Programmable Current with Single Wire
• 32-Step Logarithmic Scale
• 20/25mA Max Current per Channel
• Four Low Current Settings Down to 50µA
• Low IQ (50µA) for Low Current Mode
• Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum Efficiency and VF Coverage
• Drives up to Six Channels of LEDs
• Individual Main/Sub-Group Control
• No Inductors, Low Noise Operation
• 0.5/1/2MHz Constant Switching Frequency
• Small Application Circuit
• Built-In Thermal Protection
• Built-In Auto-Disable For Open Circuit
• Automatic Soft Start
• IQ <1µA in Shutdown
• Thermally-Enhanced QFN4040-16 Package: Available in “Green” Molding Compound (No Br, Sb)
• Lead Free Finish / RoHS Compliant (Note 1)
APPLICATIONs
• Color (RGB) Lighting
• Programmable Current Sinks
• White LED Backlighting
• White Photo Flash for Digital Still Cameras