General Description
   The AP1019 is a dual H-Bridge Motor Driver to operate up to 9.0V power supply. It has four drive modes of operation; Forward, Reverse, Brake and Standby. It is capable to configure the input logic which is suitable for the PWM drive with the SEL terminal. The driver works up to 1MHz, therefore it can suppress the current ripple and reduce the motor sound.

FEATUREs
• Wide Motor Driving Voltage     2.0V to 9.0V
• Power Supply Voltage    2.7V to 5.5V
• Maximum Output Current (DC)    1.1A (max)
• Maximum Output Current (Peak)    2.0A (Ta=25°C, 10ms/200ms)
• H-Bridge ON Resistance    RON (TOP+BOT)=0.35Ω @Ta=25°C
• PWM Operation Frequency    1MHz(max)
• Under Voltage Detection Circuit
• Thermal Shut Down Circuit
• Operation Temperature Range    -30 ~ 85°C
• Package               16-pin WLCSP (1.96mm×1.96mm )