General Description
The Am29LV800D is an 8 Mbit, 3.0 volt-only Flash memory organized as 1,048,576 bytes or 524,288 words. The device is offered in 48-ball FBGA, 44-pin SO, and 48-pin TSOP packages. For more information, refer to publication number 21536. The word-wide data (x16) appears on DQ15–DQ0; the byte-wide (x8) data appears on DQ7–DQ0. This device requires only a single, 3.0 volt VCC supply to perform read, program, and erase operations. A standard EPROM programmer can also be used to program and erase the device.

Distinctive Characteristics
■ Single power supply operation
  — 2.7 to 3.6 volt read and write operations for battery-powered applications
■ Manufactured on 0.23 µm process technology
  — Compatible with 0.32 µm Am29LV800 device
■ High performance
  — Access times as fast as 70 ns
■ Ultra low power consumption (typical values at 5 MHz)
  — 200 nA Automatic Sleep mode current
  — 200 nA standby mode current
  — 7 mA read current
  — 15 mA program/erase current
■ Flexible sector architecture
  — One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and fifteen 64 Kbyte sectors (byte mode)
  — One 8 Kword, two 4 Kword, one 16 Kword, and fifteen 32 Kword sectors (word mode)
  — Supports full chip erase
  — Sector Protection features:
    A hardware method of locking a sector to prevent any program or erase operations within that sector
    Sectors can be locked in-system or via programming equipment
    Temporary Sector Unprotect feature allows code changes in previously locked sectors
■ Unlock Bypass Program Command
  — Reduces overall programming time when issuing multiple program command sequences
■ Top or bottom boot block configurations available
■ Embedded Algorithms
  — Embedded Erase algorithm automatically preprograms and erases the entire chip or any combination of designated sectors
  — Embedded Program algorithm automatically writes and verifies data at specified addresses
■ Minimum 1 million write cycle guarantee per sector
■ 20-year data retention at 125°C
  — Reliable operation for the life of the system
■ Package option
  — 48-ball FBGA
  — 48-pin TSOP
  — 44-pin SO
■ Compatibility with JEDEC standards
  — Pinout and software compatible with single power supply Flash
  — Superior inadvertent write protection
■ Data# Polling and toggle bits
  — Provides a software method of detecting program or erase operation completion
■ Ready/Busy# pin (RY/BY#)
  — Provides a hardware method of detecting program or erase cycle completion
■ Erase Suspend/Erase Resume
  — Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation
■ Hardware reset pin (RESET#)
— Hardware method to reset the device to reading array data