General Description
The AK8817/18 is a Digital Video Encoder for Portable and Mobile application. ITU-R BT.601 level compatible Y, Cb,and Cr signals which correspond to 27MHz or square pixel are encoded into either NTSC or PAL compatible composite video signal. Interface is made in HSYNC-, VSYNC- synchronized slave-mode operation or ITU-R.Bt656. AK8817/18 has 75ohm driver with LPF.
It is possible to encode the VBID(CGMS-A) and WSS signal on the output video signal. Host Control interface is I2C Bus I/F.
FEATUREs
• NTSC-M, PAL-B, D, G, H, I Composite Video encoding
• Y:Cb:Cr 4:2:2
• H/V Slave Operation / ITU-R.BT656 Interface
• Y filtering: 2 x over-sampling
• C filtering: 4 x over-sampling
• 9bit DAC
• Setup
• Macrovision Rev.7.1.1L (*1)AK8818)
• VBID ( CGMS-A ) Compatible
• WSS Compatible
• Operation Clock rate : 27MHz or Square-pixel Clock rate(NTSC:24.5454MHz/PAL29.50MHz)
• Video Amp with LPF
• On-chip Color Bar Output
• Black Burst Output
• Power Supply (AVDD, DVDD) 2.7V - 3.3V
• I/F Power Supply (PVDD) 1.6V - 3.3V
• Power Down mode
• Monolithic CMOS
• 41pin FBGA(4mm x 4mm) / 48pin LQFP (7mm x 7mm) (*2)