Phase-Locked Loop

S Ei’s 54HC4046RP (RP for RAD-PAK®) high speed Phase Lock Loop microcircuit features a 100 kilorad (Si) total dose tolerance. This device uses advanced CMOS technology to obtain high frequency operation. The 54HC4046RP contains a low power linear voltage controlled oscillator (VCO), a source follower, and three phase comparators. The three phase comparators have a common signal input and a common comparator input. The signal input has a self biasing amplifier allowing signals to be either capacitively coupled to the phase comparators with a small signal or directly coupled with standard input logic levels. Any one of the three comparators feeds an external filter network, which in turn feeds the VCO input. This input is a very high impedance CMOS input that also drives the source follower. An inhibit pin is provided to disable the VCO and the source follower, providing a method of putting the IC in a low power state. Capable of surviving space environments, the 54HC4046RP is ideal for many satellite, spacecraft, and space probe missions. The radiation hardened RADPAK® technology incorporates radiation shielding in the microcircuit package. The 54HC4046RP is available in Class S packaging and screening.

Features
• RAD-PAKÒ Technology Hardened
   Against Natural Space Radiation
• Total Dose Hardness >100 krad (Si)
• Low Power Phase Lock Loop
• Package:
   -16 Pin RAD-PAKÒ Flat Package
   -16 Pin RAD-PAKÒ DIP
• Low Dynamic Power Consumption
   - VCC = 4.5V
• Maximum VCO Operating Frequency
   - 12 MHz (VCC = 4.5V)
• Fast Comparator Response Time (VCC = 4.5V)
   - Comparator I: 25 ns
   - Comparator II: 30 ns
   - Comparator III: 25 ns
• Screening per TM 5004
• QCI per TM5005