GENERAL DESCRIPTIONS
The W25Q32FW (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 1.65V to 1.95V power supply with current consumption as low as 4mA active and 1µA for power-down. All devices are offered in space-saving packages.
The W25Q32FW array is organized into 32,768 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q32FW has 1,024 erasable sectors and 64 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See Figure 2.)

FEATURES
● New Family of SpiFlash Memories
   – W25Q32FW: 32M-bit / 4M-byte
   – Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
   – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
   – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
   – QPI: CLK, /CS, IO0, IO1, IO2, IO3
   – Software & Hardware Reset
● Highest Performance Serial Flash
   – 104MHz Single, Dual/Quad SPI clocks
   – 208/416MHz equivalent Dual/Quad SPI
   – 50MB/S continuous data transfer rate
   – Min 100K Program-Erase cycles per secto
   – More than 20-year data retention
● Efficient “Continuous Read” and QPI Mode
   – Continuous Read with 8/16/32/64-Byte Wrap
   – As few as 8 clocks to address memory
   – Quad Peripheral Interface (QPI) reduces instruction overhead
   – Allows true XIP (execute in place) operation
   – Outperforms X16 Parallel Flash
● Flexible Architecture with 4KB sectors
   – Uniform Sector/Block Erase (4K/32K/64K-Byte)
   – Program 1 to 256 byte per programmable page
   – Erase/Program Suspend & Resume
● Advanced Security Features
   – Software and Hardware Write-Protect
   – Power Supply Lock-Down and OTP protection
   – Top/Bottom, Complement array protection
   – Individual Block/Sector array protection
   – 64-Bit Unique ID for each device
   – Discoverable Parameters (SFDP) Register
   – 3X256-Bytes Security Registers with OTP locks
   – Volatile & Non-volatile Status Register Bits
● Space Efficient Packaging
   – 8-pin SOIC/VSOP 208-mil, XSON 4x4-mm
   – 8-pad WSON 6x5-mm / 8x6-mm
   – 16-pin SOIC 300-mil (additional /RESET)
   – 24-ball TFBGA 8x6-mm(additional /RESET)
   – 12-ball WLCSP
   – Contact Winbond for KGD and other options