PECL CLOCK SYNTHESIZER
DATASHEET
ICS507-01
Description
The ICS507-01 is an inexpensive, simple way to
generate a low jitter 155.52 MHz (or other high speed)
differential PECL clock output from a low frequency
crystal input. Using Phase-Locked-Loop (PLL)
techniques, the devices use a standard fundamental
mode crystal to produce output clocks up to 200 MHz.
Stored in each chip’s ROM is the ability to generate a
selection of different multiples of the input reference
frequency, including an exact 155.52 MHz clock from
common crystals. For lowest jitter and phase noise on
a 155.52 MHz clock, a 19.44 MHz crystal and the x8
selection can be used.
This product is intended for clock generation. It has low
output jitter (variation in the output period), but input to
output skew and jitter are not defined nor guaranteed.
Features
• Packaged in 16 pin SOIC
• Available in Pb (lead) free package
• Input crystal frequency of 5 - 27 MHz
• Input clock frequency of 5 - 52 MHz
• Enable usage of common low-cost crystal
• Differential PECL output clock frequencies up to 200
MHz
• Duty cycle of 49/51
• Operation voltage of 3.3 V or 5.0 V (±5%)
• Ideal for SONET applications and oscillator
manufacturers
• Available in die form
• Industrial temperature versions available
• ICS507-02 is no longer available
Block Diagram
2
S0:1
X1/ICLK
Crystal or
clock input
X2
Clock
Buffer/
Crystal
Oscillator
VDD
1.1 kohm
RES
Clock
Synthesis
and Control
Circuitry
270 ohm
62 ohm
62 ohm
270 ohm
PECL
VDD
PECL
GND
Output Enable
(both outputs)
Output resistors shown are for unterminated lines. Refer to MAN09 for additional information.
IDT™ / ICS™ PECL CLOCK SYNTHESIZER
1
ICS507-01
REV I 041905