TC74LCX245F(2010) データシートの表示（PDF） - Toshiba

部品番号

コンポーネント説明

一致するリスト

TC74LCX245F
(Rev.:2010)

Low-Voltage Octal Bus Transceiver with 5-V Tolerant Inputs and Outputs

Toshiba 

TC74LCX245F/FT/FK

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

TC74LCX245F,TC74LCX245FT,TC74LCX245FK

Low-Voltage Octal Bus Transceiver with 5-V Tolerant Inputs and Outputs

The TC74LCX245 is a high-performance CMOS octal bus

transceiver. Designed for use in 3.3-V systems, it achieves

high-speed operation while maintaining the CMOS low power

dissipation.

The device is designed for low-voltage (3.3 V) VCC applications,

but it could be used to interface to 5-V supply environment for

both inputs and outputs.

The direction of data transmission is determined by the level of

the DIR input. The enable input ( OE ) can be used to disable the

device so that the busses are effectively isolated.

All inputs are equipped with protection circuits against static

discharge.

Features (Note)

• Low-voltage operation: VCC = 1.65 to 3.6 V

• High-speed operation: tpd = 7.0 ns (max) (VCC = 3.0 to 3.6 V)

• Ouput current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V)

• Latch-up performance: ＞±500 mA

• Available in JEITA SOP, TSSOP and VSSOP (US)

• Bidirectional interface between 5.0 V and 3.3 V signals

• Power-down protection provided on all inputs and outputs

• Pin and function compatible with the 74 series

(74AC/VHC/HC/F/ALS/LS etc.) 245 type

Note: Do not apply a signal to any bus pins when it is in the

output mode. Damage may result.

All floating (high impedance) bus pins must have their

input levels fixed by means of pull-up or pull-down

resistors.

TC74LCX245F

TC74LCX245FT

TC74LCX245FK

Weight

SOP20-P-300-1.27A

TSSOP20-P-0044-0.65A

VSSOP20-P-0030-0.50

: 0.22g (typ.)

: 0.08 g (typ.)

: 0.03 g (typ.)

Note: The Electrical Characteristics of VCC=1.8±0.15V is only applicable for products which manufactured

from January 2009 onward.

1

2010-01-31

Share Link: