MWCT1001AVLH データシートの表示（PDF） - Freescale Semiconductor
部品番号
コンポーネント説明
一致するリスト
MWCT1001AVLH Datasheet PDF : 41 Pages
| |||
1 Absolute Maximum Ratings
1.1 Electrical Operating Ratings
Table 1. Absolute Maximum Electrical Ratings (VSS = 0 V, VSSA = 0 V)
Characteristic
Symbol
Notes1
Min.
Max.
Unit
Supply Voltage Range
VDD
–0.3
4.0
V
Analog Supply Voltage Range
ADC High Voltage Reference
Voltage difference VDD to VDDA
Voltage difference VSS to VSSA
Digital Input Voltage Range
RESET Input Voltage Range
Oscillator Input Voltage Range
Analog Input Voltage Range
Input clamp current, per pin (VIN < VSS – 0.3 V)2, 3
Output clamp current, per pin4
VDDA
VREFHx
ΔVDD
ΔVss
VIN
VIN_RESET
VOSC
VINA
VIC
VOC
Pin Group 1
Pin Group 2
Pin Group 4
Pin Group 3
–0.3
–0.3
–0.3
–0.3
–0.3
–0.3
–0.4
–0.3
–
–
4.0
V
4.0
V
0.3
V
0.3
V
5.5
V
4.0
V
4.0
V
4.0
V
–5.0
mA
±20.0
mA
Contiguous pin DC injection current—regional limit
sum of 16 contiguous pins
IIcont
–25
25
mA
Output Voltage Range (normal push-pull mode)
VOUT
Pin Group 1,2
–0.3
4.0
V
Output Voltage Range (open drain mode)
VOUTOD
Pin Group 1
–0.3
5.5
V
RESET Output Voltage Range
VOUTOD_RESET Pin Group 2
–0.3
4.0
V
DAC Output Voltage Range
VOUT_DAC
Pin Group 5
–0.3
4.0
V
Ambient Temperature
TA
–40
105
°C
Storage Temperature Range
TSTG
–55
150
°C
1. Default Mode:
• Pin Group 1: GPIO, TDI, TDO, TMS, TCK
• Pin Group 2: RESET
• Pin Group 3: ADC and Comparator Analog Inputs
• Pin Group 4: XTAL, EXTAL
• Pin Group 5: DAC analog output
2. Continuous clamp current.
3. All 5 volt tolerant digital I/O pins are internally clamped to VSS through an ESD protection diode. There is no diode connection to VDD.
If VIN greater than VDIO_MIN (=VSS –0.3 V) is observed, then there is no need to provide current limiting resistors at the pads. If this
limit cannot be observed, then a current limiting resistor is required.
4. I/O is configured as push-pull mode.
Automotive Wireless Transmitter Controller, Rev. 1.0, 08/2014
4
Freescale Semiconductor
Share Link: 