MB90520 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

一致するリスト

MB90520

16-bit Proprietary Microcontroller

Fujitsu 

MB90520 Series

Pin no.

LQFP-120*1

QFP-120*2

117

Pin name

P26

ZIN0

INT7

118

P27

ADTG

120

P30

1

P31

CKOT

2

P32

OUT0

3

P33

OUT1

4

P34

OUT2

5

P35

OUT3

6

P36

PG00

*1: FPT-120P-M05

*2: FPT-120P-M13

Circuit

type

Function

E

This is a general-purpose I/O port.

This port can be used as count clock Z input for 8/16-bit up/down

counter/timer 0.

This is a request input pin of the DTP/external interrupt circuit

ch.7.

E

This is a general-purpose I/O port.

This is an external trigger input pin of the 8/10-bit A/D converter.

Since this input is used as required for 8/10-bit A/D converter input

operation, output by other functions must be suspended except for

intentional operation.

E

This is a general-purpose I/O port.

E

This is a general-purpose I/O port.

This is a clock monitor function output pin.

This function is valid when clock monitor output is enabled.

E

This is a general-purpose I/O port.

This function becomes valid when waveform output from the

OUT0 is disabled.

This is an event output pin for output compare 0 (OCU) ch.0.

This function is valid when output for each channel is enabled.

E

This is a general-purpose I/O port.

This function becomes valid when waveform output from the

OUT1 is disabled.

This is an event output pin for output compare 0 (OCU) ch.1.

This function is valid when output for each channel is enabled.

E

This is a general-purpose I/O port.

This function becomes valid when waveform output from the

OUT2 is disabled.

This is an event output pin for output compare 0 (OCU) ch.2.

This function is valid when output for each channel is enabled.

E

This is a general-purpose I/O port.

This function becomes valid when waveform output from the

OUT3 is disabled.

This is an event output pin for output compare 0 (OCU) ch.3.

This function is valid when output for each channel is enabled.

E

This is a general-purpose I/O port.

This function becomes valid when waveform output from the PG00

is disabled.

This is an output pin of 8/16-bit PPG timer 0.

This function becomes valid when waveform output from PG00 is

enabled.

(Continued)

9

Share Link: