datasheetbank_Logo
データシート検索エンジンとフリーデータシート

M2V64S20BTP データシートの表示(PDF) - Mitsumi

部品番号
コンポーネント説明
一致するリスト
M2V64S20BTP
Mitsumi
Mitsumi Mitsumi
M2V64S20BTP Datasheet PDF : 52 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
PC133 SDRAM (Rev.0.5)
Oct. '99
64M bit Synchronous DRAM
MITSUBISHI LSIs
M2V64S20BTP-6 (4-BANK x 4194304-WORD x 4-BIT)
M2V64S30BTP-6 (4-BANK x 2097152-WORD x 8-BIT)
M2V64S40BTP-6 (4-BANK x 1048576-WORD x 16-BIT)
BASIC FUNCTIONS
The M2V64S20(30,40)BTP provides basic functions, bank (row) activate, burst read / write,
bank (row) precharge, and auto / self refresh.
Each command is defined by control signals of /RAS, /CAS and /WE at CLK rising edge. In
addition to 3 signals, /CS ,CKE and A10 are used as chip select, refresh option, and
precharge option, respectively. To know the detailed definition of commands, please see the
command truth table.
CLK
/CS
Chip Select : L=select, H=deselect
/RAS
Command
/CAS
Command define basic commands
/WE
Command
CKE
Refresh Option @refresh command
A10
Precharge Option @precharge or read/write command
Activate (ACT) [/RAS =L, /CAS =/WE =H]
ACT command activates a row in an idle bank indicated by BA.
Read (READ) [/RAS =H, /CAS =L, /WE =H]
READ command starts burst read from the active bank indicated by BA. First output data
appears after /CAS latency. When A10 =H at this command, the bank is deactivated after the
burst read (auto-precharge,READA).
Write (WRITE) [/RAS =H, /CAS =/WE =L]
WRITE command starts burst write to the active bank indicated by BA. Total data length to be
written is set by burst length. When A10 =H at this command, the bank is deactivated after the
burst write (auto-precharge, WRITEA).
Precharge (PRE) [/RAS =L, /CAS =H, /WE =L]
PRE command deactivates the active bank indicated by BA. This command also terminates
burst read /write operation. When A10 =H at this command, both banks are deactivated
(precharge all, PREA).
Auto-Refresh (REFA) [/RAS =/CAS =L, /WE =CKE =H]
REFA command starts auto-refresh cycle. Refresh address including bank address are
generated inter-nally. After this command, the banks are precharged automatically.
MITSUBISHI ELECTRIC
5

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]