IDT82P20416 データシートの表示（PDF） - Integrated Device Technology

部品番号

コンポーネント説明

一致するリスト

IDT82P20416

16-Channel Short Haul T1/E1/J1 Line Interface Unit

Integrated Device Technology 

IDT82P20416

16-CHANNEL SHORT HAUL T1/E1/J1 LINE INTERFACE UNIT

APPLICATIONS

‹ SDH/SONET multiplexers

‹ Central office or PBX (Private Branch Exchange)

‹ Digital access cross connects

‹ Remote wireless modules

‹ Microwave transmission systems

DESCRIPTION

The IDT82P20416 is a 16-channel high-density T1/E1/J1 short haul

Line Interface Unit. Each channel of the IDT82P20416 can be indepen-

dently configured. The configuration is performed through a Serial

microprocessor interface.

In the receive path, through a Single Ended or Differential line inter-

face, the received signal is processed by an adaptive Equalizer and then

sent to a Slicer. Clock and data are recovered from the digital pulses

output from the Slicer. After passing through an enabled or disabled

Receive Jitter Attenuator, the recovered data is decoded using B8ZS/

AMI/HDB3 line code rule in Single Rail NRZ Format mode and output to

the system, or output to the system without decoding in Dual Rail NRZ

Format mode and Dual Rail RZ Format mode.

In the transmit path, the data to be transmitted is input on TDn in

Single Rail NRZ Format mode or TDPn/TDNn in Dual Rail NRZ Format

mode and Dual Rail RZ Format mode, and is sampled by a transmit

reference clock. The clock can be supplied externally from TCLKn or

recovered from the input transmit data by an internal Clock Recovery. A

selectable JA in Tx path is used to de-jitter gapped clocks. To meet T1/

E1/J1 waveform standards, five preset T1 templates, two E1 templates

and one J1 template, as well as an arbitrary waveform generator are

provided. The data through the Waveform Shaper, the Line Driver and

the Tx Transmitter is output on TTIPn and TRINGn.

Alarms (including LOS, AIS) and defects (including BPV, EXZ) are

detected in both receive line side and transmit system side. AIS alarm,

PRBS, ARB and IB patterns can be generated /detected in receive /

transmit direction for testing purpose. Analog Loopback, Digital Loop-

back and Remote Loopback are all integrated for diagnostics.

A line monitor function per T1.102 is available to provide a Non-Intru-

sive Monitoring of channels of other devices.

JTAG per IEEE 1149.1 is also supported by the IDT82P20416.

Applications

9

December 17, 2009

Share Link: