EPCS16 データシートの表示（PDF） - Altera Corporation

部品番号

コンポーネント説明

一致するリスト

EPCS16

Serial Configuration Devices

Altera Corporation 

C51014-3.3

3. Serial Configuration Devices (EPCS1,

EPCS4, EPCS16, EPCS64, and EPCS128)

Data Sheet

Features

The serial configuration devices provide the following features:

■ 1-, 4-, 16-, 64-, and 128-Mbit flash memory devices that serially configure

Arria® series, Cyclone® series, all device families in the Stratix® series except the

Stratix device family, and FPGAs using the active serial (AS) configuration scheme

■ Easy-to-use four-pin interface

■ Low cost, low-pin count, and non-volatile memory

■ Low current during configuration and near-zero standby mode current

■ 2.7-V to 3.6-V operation

■ EPCS1 and EPCS4 available in 8-pin small outline integrated circuit (SOIC)

package. EPCS16 available in 8-pin or 16-pin SOIC packages. EPCS64 and

EPCS128 available in 16-pin SOIC package

■ Enables the Nios® processor to access unused flash memory through AS memory

interface

■ Re-programmable memory with more than 100,000 erase/program cycles

■ Write protection support for memory sectors using status register bits

■ In-system programming support with SRunner software driver

■ In-system programming support with USB Blaster™, EthernetBlaster, or

ByteBlaster™ II download cables

■ Additional programming support with the Altera® Programming Unit (APU) and

programming hardware from BP Microsystems, System General, and other

vendors

■ Delivered with the memory array erased (all the bits set to 1)

1 The term “serial configuration devices” used in this document refers to Altera EPCS1,

EPCS4, EPCS16, EPCS64, and EPCS128.

© December 2009 Altera Corporation

Configuration Handbook (Complete Two-Volume Set)

Share Link: