VP306SCG データシートの表示（PDF） - Mitel Networks

部品番号

コンポーネント説明

一致するリスト

VP306SCG

Satellite Channel Decoder

Mitel Networks 

DRAFT - PRELIMINARY DATA

VP305/6

1.6.1. Output stage.

A complete transport stream data packet of 188 bytes is output on the MDO7:0 bus, clocked by

the MCLK signal. The MDO7:0 bus is enabled by pulling the MDOEN low. The start sync byte is

flagged by the MOSTRT signal going high and the MOVAL signal will also go high to indicate a

valid packet. If the packet contains uncorrectable bytes, a BKERR signal will go low on the first

error byte and remain low until the end of the packet. The TEI bit in the packet header can

optionally be set automatically to indicate a packet with uncorrectable bytes.

1.7. Microprocessor interface.

This interface can be either a serial I²C bus or a parallel interface port, see section 3 starting on

page 58.

The duplication or disclosure of data contained on this sheet is subject to the restrictions

on the title page of this document.

19

Share Link: