AMMC0XXA データシートの表示（PDF） - Advanced Micro Devices
部品番号
コンポーネント説明
一致するリスト
AMMC0XXA Datasheet PDF : 39 Pages
| |||
Term
Miniature Card Frontside
Miniature Card Topside
PC Card
PC Card Adapter
Power/Insertion Signals
Pull-Ups
Removal, Cold
Removal, Hot
Removal, Pseudo Hot
Sector
Tuple
User Insertable
User Removable
User Non-Removable
XIP
PRELIMINARY
Table 1. Miniature Card Definitions (Continued)
Meaning
The side of the Miniature Card that contains power, insertion, ground, voltage keys, and
alignment notch. The frontside is opposite the backside.
The side of the Miniature Card that contains the Miniature Card label. The topside is opposite
the bottomside.
A memory or I/O card compatible with the PC Card Standard.
The hardware that connects the Miniature Card 60 contact bus to the PC Card 68 pin bus.
This hardware can be mechanically implemented by following the PC Card Type II
specification.
The three signals on the frontside of the Miniature Card that provide ground, power and early
detection of insertion.
Resistors used to ensure that signals do not float when no device is driving them.
User Perception: Removal of a Miniature Card when the host is off.
Host State: The host would either be off or in sleep mode, no bus activity is occurring, the
host is non-operational by the user. User would turn off the host, then remove the Miniature
Card and then press a button to turn the host on for it to become operational again.
User Perception: Removal of the Miniature Card when the host is running.
Host State: The host would be in running mode, bus activity is occurring, the host is
operational by the user. User removes the card, the host recognizes the event, and the host
continues to be operational.
User Perception: Removal of the Miniature Card when the host is running.
Host State: The host would be in running mode, bus activity is occurring, the host is
operational by the user. User removes the card, the host recognizes the event, the host
immediately powers off before the Miniature Card removes contact with the host’s internal
bus. The user would then need to press a button to turn the host on for it to be operational
again.
Usually 64 Kbytes, but depends on device used in the card. In word mode, a sector is 64
KWords.
An element of the PC Card Standard CIS that provides card attribute information, and a link
to the next tuple in a string of tuples.
All Miniature Cards should be inserted into the host by the user without the need for any
special tools.
This type of Miniature Card can be removed by the user without the need for any special tools.
It contains programs and data that users may want to switch often. The use of this type of
card is similar to a floppy disk.
This type of Miniature Card must be removed by the user with a special tool. It contains
memory upgrades or boot program that users switches only when they require an upgrade.
The use of this type of card is similar to a SIMM memory expansion or boot hard disk.
Acronym for eXecute-In-Place, which refers to code that executes directly from a Miniature
Card.
AmMC0XXA
3
Share Link: 