ADG725 データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
一致するリスト
ADG725 Datasheet PDF : 16 Pages
| |||
ADG725/ADG731
TERMINOLOGY
VDD
VSS
IDD
ISS
GND
S
D
VD (VS)
RON
⌬RON
RFLAT(ON)
IS (OFF)
ID (OFF)
ID, IS (ON)
VINL
VINH
IINL (IINH)
CS (OFF)
CD (OFF)
CD, CS (ON)
CIN
tTRANSITION
tD
Charge Injection
OFF Isolation
Crosstalk
On Response
Insertion Loss
Most Positive Power Supply Potential.
Most Negative Power Supply in a Dual-Supply Application. In single-supply applications, connect to GND.
Positive Supply Current.
Negative Supply Current.
Ground (0 V) Reference.
Source Terminal. May be an input or output.
Drain Terminal. May be an input or output.
Analog Voltage on Terminals D, S.
Ohmic Resistance between D and S.
On Resistance Match between any Two Channels.
Flatness is defined as the difference between the maximum and minimum value of on resistance,
as measured over the specified analog signal range.
Source Leakage Current with the Switch OFF.
Drain Leakage Current with the Switch OFF.
Channel Leakage Current with the Switch ON.
Maximum Input Voltage for Logic 0.
Minimum Input Voltage for Logic 1.
Input Current of the Digital Input.
OFF Switch Source Capacitance. Measured with reference to ground.
OFF Switch Drain Capacitance. Measured with reference to ground.
ON Switch Capacitance. Measured with reference to ground.
Digital Input Capacitance.
Delay time measured between the 50% points of the eighth clock falling edge and 90% points of the output
when switching from one address state to another.
OFF time measured between the 80% points of both switches when switching from one address state to another.
A measure of the glitch impulse transferred from the digital input to the analog output during switching.
A measure of unwanted signal coupling through an OFF switch.
A measure of unwanted signal is coupled through from one channel to another as a result of parasitic capacitance.
The Frequency Response of the ON Switch.
The Loss Due to the On Resistance of the Switch.
REV. A
–9–
Share Link: 