AD5764
Pin No.
18
19
20
21
22
23
24
25
26
27
28
29
32
Mnemonic
VOUTD
VOUTC
AGNDC
AGNDB
VOUTB
VOUTA
AGNDA
REFAB
REFCD
REFOUT
REFGND
TEMP
BIN/2sCOMP
Preliminary Technical Data
Function
Analog Output Voltage of DAC D. Buffered output with a nominal full-scale output
range of ±10 V. The output amplifier is capable of directly driving a 10 kΩ, 200 pF
load.
Analog Output Voltage of DAC C. Buffered output with a nominal full-scale output
range of ±10 V. The output amplifier is capable of directly driving a 10 kΩ, 200 pF
load.
Ground Reference Pin for DAC C Output Amplifier.
Ground Reference pin for DAC B Output Amplifier.
Analog Output Voltage of DAC B. Buffered output with a nominal full-scale output
range of ±10 V. The output amplifier is capable of directly driving a 10 kΩ, 200 pF
load.
Analog Output Voltage of DAC A. Buffered output with a nominal full-scale output
range of ±10 V. The output amplifier is capable of directly driving a 10 kΩ, 200 pF
load.
Ground Reference Pin for DAC A Output Amplifier.
External Reference Voltage Input for Channels A and B. Reference input range is 1 V
to 5 V; programs the full-scale output voltage. REFIN = 5 V for specified performance.
External Reference Voltage Input for Channels C and D. Reference input range is 1 V
to 5 V; programs the full-scale output voltage. REFIN = 5 V for specified performance.
Reference Output. This is the buffered reference output from the internal voltage
reference. The internal reference is 5 V ± 1 mV, with a reference tempco of 10
ppm/°C.
Reference Ground Return for the Reference Generator and Buffers.
This pin provides an output voltage proportional to temperature. The output
voltage is 750 mV typical at 25°C; variation with temperature is 10 mV/°C.
Determines the DAC Coding. When set to a logic high, input coding is offset binary;
0x0000 outputs negative full-scale and 0xFFFF outputs positive full-scale. Invoking a
CLR in this mode sets the output to negative full-scale. When set to a logic low, input
coding is twos complement; 0x8000 outputs negative full-scale, 0x0000 outputs 0V,
and 0x7FFF outputs positive full-scale. Invoking a CLR in this mode sets the output
to 0 V.
Rev. PrC 21-Oct-04| Page 12 of 28