MD59-0022RTR データシートの表示（PDF） - Tyco Electronics
部品番号
コンポーネント説明
一致するリスト
MD59-0022RTR Datasheet PDF : 5 Pages
| |||
PCS CDMA Upconverter / Driver 1710—1910 GHz
Pin Configuration
PIN No. PIN
Description
1 DRV VDD1 Driver Amplifier first stage supply voltage. Must be RF
bypassed
2
DRV In 50 Ω Input to driver amplifier (DC blocking required)
3
GND DC and RF Ground
4
GND DC and RF Ground
5
MIX OUT 50 Ω Output of Mixer (DC blocked)
6
GND DC and RF Ground
7
LO IN Local Oscillator Input (-10 to -5 dBm) (DC blocked)
8
LO VDD LO Amplifier Supply Voltage - Bypassing required
9
IF+ VDD IF+ supply voltage. Off chip inductor and IF bypassing
required
10
IF+ IN IF+ input port. Off chip matching elements required
11
IF- IN IF- input port. Off chip matching elements required
IF- VDD
12
IF- VDD IF- supply voltage. Off chip inductor and IF bypassing
required
13
GND DC and RF Ground
14 DRV VDD2 Driver amplifier second stage supply voltage. Must be
RF bypassed
15 DRV OUT 50 Ω output of Driver Amplifier (DC blocked internally)
16 DRV SRC Source bias voltage of driver output stage. Required RF
bypassing and may be used to control ouput stage
current
Sample Board Schematic
Block Diagrams
DRV VDD1
DRV IN
GND
GND
MIX OUT
GND
LO IN
LO VDD
D TC114YE TL
MD59-0022
DRV SRC
DRV OUT
DRV VDD2
GND
IF- VDD
IF- IN
IF+ IN
IF+ VDD
if- in
if+ in
J1
1. Saw filter characteristics to be determined by customer, depending on band of operation. Sample boards are supplied without saw filter installed.
Data supplied with sample board is measured over US PCS1900 Tx Bond using external K&L BPF (p/n SB121-1850/T450-0/OP) and 2 dB attenua-
tion to emulate typical saw filter characteristics.
Specifications subject to change without notice.
V 2.0
North America: Tel. (800) 366-2266, Fax (800) 618-8883
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
Share Link: 