MD59-0022RTR データシートの表示（PDF） - Tyco Electronics
部品番号
コンポーネント説明
一致するリスト
MD59-0022RTR Datasheet PDF : 5 Pages
| |||
PCS CDMA Upconverter / Driver
1710—1910 MHz
MD59-0022
Features
• High Integrated Upconverter and Driver IC
• Operates over 2.7 V to 5V Supply Voltage
• +9 dBm Output Power at 51 dBc ACPR
• Low current mode for power saving at low output power
• Balanced IF Input 265 Ω
• Low LO Drive Level -10 dBm
• Operates in US and Korean PCS Bands
• Miniature TSSOP-16 Plastic Package
Description
M/A-COM’s MD59-0022 is a fully integrated upconverter / Driver
IC. It includes a balanced IF amplifier, upconverting mixer, two
stage driver amplifier and LO buffer amplifier in a miniature
TSSOP-16 plastic package. The backside of the lead frame is
exposed to facilitate excellent RF grounding and thermal transfer.
The MD59-0022 is ideally suited for CDMA handset applications
where high linearity and low power consumption are important
transmitter requirements. The MD59-0022 can also operate in a
low power mode to extend system battery life.
The MD59-0022 is fabricated using M/A-COM’s 0.5 micron low
noise E/D GaAs MESFET process. The process features full
passivation for increased performance and reliability.
TSSOP-16 Plastic Package1
(.039)
(1)
Pin 16
.041/.031
1,05/,80
.177/.169
.252
4,5/4,3
6,4
.118
Pin 1
3,0
.0256
0,65
.201/.193
5,1/4,9
.118
3,0
Exposed
Pad
1. Dimensions are: in / mm
Ordering Information
Part Number
MD59-0022TR
MD59-0022RTR
MD59-0022SMB
Package
Forward Tape and Reel1
Reverse Tape and Reel1
Sample Board
1. If specific reel size is required, consult factory for part number assignment.
Electrical Specifications TA = 25°C, VDD = 3.0V
Parameter
Complete Upconverter1 / High Power Mode
Test Conditions
Units
Conversion Gain
CDMA Linear Output Power2
VCTRL = VDD
RF Frequency = 1710 - 1910 MHz
dB
dBm
Noise Figure
LO Frequency = 1580 - 1780 MHz
IDD
LO Power = -10 dBm
VSWR (All Ports)
IF = 130 MHz
IF Input Impedance
LO-to-RF Port Leakage
Complete UPconverter1 / Low Power Mode
dB
mA
Ohms
dBm
Conversion Gain
CDMA Linear Output Power2
Noise Figure
IDD
VSWR (All Ports)
IF Input Impedance
LO-to-RF Port Leakage
RF Driver Amplifier
VCTRL = (0V)
RF Frequency = 1710 - 1910 MHz
LO Frequency = 1580 = 1780 MHz
LO Power = -10 dBm
IF = 130 MHz
dB
dBm
dB
mA
Ohms
dBm
Gain
VCTRL = VDD, RF Frequency = 1710 - 1910 MHz
dB
Gain
VCTRL = 0V, RF Frequency = 1710 - 1910 MHz
dB
1. Complete upconverter / driver measurements taken with a surface mount SAW filter between Mixer Ouput and Driver Input.
2. CDMA Linear power is defined as 51 dBc ACPR at a 1.228 MHz Offset from the carrier frequency.
Min.
Specifications subject to change without notice.
North America: Tel. (800) 366-2266, Fax (800) 618-8883
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
Typ.
24
9
10
66
1.5:1
265
-18
22
2
10
46
1.5:1
265
-18
TBD
TBD
Max.
27.2
V 2.0
Share Link: 