JANKCA1N5550US データシートの表示（PDF） - Unspecified
部品番号
コンポーネント説明
一致するリスト
JANKCA1N5550US Datasheet PDF : 28 Pages
| |||
MIL-PRF-19500/420H
* TABLE II. Group E inspection (all quality levels) for qualification and requalification only.
Inspection
Subgroup 1
Thermal shock
Temperature cycling
Electrical measurements
Subgroup 2
Steady state dc blocking life
Electrical measurements
* Subgroup 3
DPA (Decap analysis)
* Subgroup 4
Thermal impedance
curves
Junction temperature
rise (see 4.5.2.1)
Subgroup 5
Barometric pressure,
reduced (altitude
operation)
Electrical measurement
* Subgroup 6
ESD
See footnotes at end of table.
Method
MIL-STD-750
Conditions
1056
1051
20 cycles, condition D except low temperature shall be
achieved using liquid nitrogen (-195°C). Perform a visual for
cracked glass.
500 cycles, condition C, -65°C to +175°C.
See table I, subgroup 2 herein.
1048
1,000 hours, condition A; VR = VRWM
See table I, subgroup 2 and table III herein.
2101 Cross section and scribe and break.
Separate samples shall be used for each test.
Each supplier shall submit their (typical) maximum design
thermal impedance curves. In addition, optional test
conditions and ZθJX limit shall be provided to the qualifying
activity in the qualification report.
See figures 10, 11, and 12; ∆TJ ≤ 120°C; L = .375 inch;
TL = 55°C; IO = 5 A dc.
1001
Pressure (see 1.3); t = 1 min. DC method;
VR = VRWM (see 1.3); IR1 = 1.0 µA dc maximum
See table I, subgroup 2 and table III herein.
1020
Sampling
plan
45 devices
c=0
22 devices
c=0
3 devices
c=0
22 devices
c=0
n = 3, c = 0
19
Share Link: 