UTR25 データシートの表示（PDF） - Aeroflex UTMC
部品番号
コンポーネント説明
一致するリスト
UTR25 Datasheet PDF : 10 Pages
| |||
SYMBOL
PARAMETER
CONDITION
MIN TYP MAX UNIT
IOZ
Three-state output leakage current
VO = VDD and
TTL half-drive buffer
VSS
-5
TTL single-drive, CMOS, OSC buffers
-10
TTL double-drive buffer
-20
TTL triple-drive buffer *
-30
µA
5
10
20
30
IOS
Short-circuit output current 2 ,4
VO = VDD and
TTL half-drive buffer
VSS
-50
TTL single-drive, CMOS, OSC buffers
-100
TTL double-drive buffer
-200
TTL triple-drive buffer *
-300
mA
50
100
200
300
IDDQ Quiescent Supply Current
VDD = 5.5V
1
mA
CIN
Input capacitance 5
ƒ = 1MHz @ 0V
12
pF
COUT Output capacitance 5
ƒ = 1MHz @ 0V
pF
TTL half-drive buffer
11
TTL single-drive, CMOS, OSC buffers
12
TTL double-drive buffer
14
TTL triple-drive buffer *
22
CIO
Bidirect I/O capacitance 5
ƒ = 1MHz @ 0V
pF
TTL single-drive, CMOS, OSC buffers
13
TTL double-drive buffer
15
TTL triple-drive buffer *
23
Notes:
* Contact UTMC prior to usage.
1. Functional tests are conducted in accordance with MIL-STD-883 with the following input test conditions: VIH = VIH(min) + 20%, - 0%;
VIL = VIL(max) + 0%, - 50%, as specified herein, for TTL, CMOS, or Schmitt compatible inputs. Devices may be tested using any input voltage
within the above specified range, but are guaranteed to VIH(min) and VIL(max).
2. Supplied as a design limit but not guaranteed or tested.
3. Per MIL-PRF-38535, for current density < 5.0E5 amps/cm2, the maximum product of load capacitance (per output buffer) times frequency should not
exceed 3,765pF*MHz.
4. Not more than one output may be shorted at a time for maximum duration of one second.
5. Capacitance measured for initial qualification and when design changes may affect the value. Capacitance is measured between the designated terminal and VSS
at frequency of 1MHz and a signal amplitude of 50mV rms maximum.
9
Share Link: 